What to Check if Your Hot Water Service is Not Functioning

What to Check if Your Hot Water Service is Not Functioning

Blog Article

Book Service Now

Are you in search of ideas concerning Hot Water Heater Repair?

Many modern-day homes take advantage of an electrical hot water heater for their furnace, due to its ease and also convenience of use. Nonetheless, similar to any other electric devices, troubles might emerge with its use, all of a sudden. It can be actually discouraging to get up to a chilly shower instead of a hot one or having your bath with water that isn't warm adequate or perhaps also warm. Whatever the situation may be, water heater problems can be fairly stressful. Luckily, we've made a listing of feasible options to your hot water heater problems. There are a variety of aspects that might trigger much of these troubles, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the trouble is, getting it dealt with need to not posture way too much of a concern if you comply with these steps:

Check Your Power Supply:

As basic as this may appear, it is very essential. Without ample power, your hot water heater will not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, simply turn it on and off once again. Replace any broken or damaged fuse. Check the home appliance with power after these changes to see if it's currently functioning.

Check the Heating Element in the Hot Water Heater:

If it's not a power issue, then attempt looking into your burner if it is still working. Test each of your burner to make sure the problem isn't with any one of them. If any one of them is defective, change that component and after that check whether the warm water is back on.

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to inspect the temperature setups on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature level reset above the thermostat. This need to assist warm the water. Transform the circuit breaker back on and also check if the trouble has been resolved.

Call An Expert:

If after replacing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a specialist viewpoint. The problem with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the amount of warm water needed in your house. Whatever the case might be, an expert plumber would certainly assist solve the trouble.

Conclusion

Hot water heater issues are not always significant. Many of them result from minor concerns like a blown fuse or worn-out burner. Replacing the damaged parts need to work. Nonetheless, if you are still unable to fix the trouble, give a call to your closest plumber to find to get it dealt with.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

As a person who reads about No Hot Water — Water Heater Repair, I think sharing that post was worthwhile. Do you know about another person who is in to No Hot Water — Water Heater Repair? Do not hesitate to promote it. We take joy in reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Hire A Pro

Report this page